TABS NOT WORKING IN X3 MILL

[CADCAM3D5AXIS]

I GO TO USE TABS FOR A MILL PROFILE AND THEY DO NOT SHOW UP IN THE MILL PATH,I HAVE USED THEM BEFORE AND IT SEEMS A LITTLE BUGGY ANY HELP ON SETTINGS THAT ARE REQUIRED TO ENABLE OR DISABLE THEM THAT CAUSES THE TABS TO NOT FUNCTION?

THANKS

[Chris Parish]

Ow.. what's with the yelling??

[malibu]

cadcam

it is operator error.

 

go to settings and select tab all.

[CADCAM3D5AXIS]

sorry about the yelling capslock was on ,as for the tabs they dont work when set to auto but i was able to go manual edit and input them were i wanted to but,it has worked in auto before when you select tabs and how many, but every now and then it wants to fight the settings and auto setting will not work. i thinks its a XP MS issue or another X cam bug since it is random.Any thoughts ?

[tedly]

It has happen to me sometimes too. You can work around it by edit tab and add tabs. They will show up just move them around where you want.

[CADCAM3D5AXIS]

No Sooner than i posted i did just that and was able to make it work.The funny thing is it used to work on auto which was kinda cool and then you just pick the amount and let it rip! As For the buggy software i believe it still has a few quirks to work out. but it is Very Nice for the tools it does has!

[Jayson Kramer]

You are correct that some time with the default it is intermediate. I prefer to use Square points option works well.