Komo routers Help?

[Rick Henrickson The Boeing Co.]

Does anyone know what M code turns on the cool air gun? there is 2 nozels on ours a copper tube wich is just air and it works but the other is a flex hose with cool air gun attached but I can not figure out how to get it on.

 

Just a side note we have tried to reach komo but it is difficult.

[Tom Dorgan from American Precision]

Try M14 for on and M15 for off. Found this info on a generic mill code page.

[RObert TImby]

I have a DMS, I know that it's a different machine but if you have a ***or controller it's M65 on and M66 off that's what works on mine.

[DL]

Don't know if this will help, but on Komo VMC's

coolant codes varied between models/years.

Air blast m50 or m7.

High pressure coolant (through tool) m26 or m18

Regular coolant m8

All coolants off m9.

There may be more I don't know of, and these may

not apply to routers.

 

When in doubt refer to electrical drawings, Komo

did provide fairly good electrical drawings at

one time.

[George Gerhard]

Rick

use M08 or M07 and M09 to turn it off

 

rgds

George

www.cnctechnologyservices.com

[Rick Henrickson The Boeing Co.]

I haven't got to test the codes yet will try this afternoon

 

Thanks Guys