SAE J514-4 Port

[X-L Engineering Corp]

Hi Guy's

Need some assistance we just got some new work the first in over a year and the spec on the threaded features is SAE J514-4 Port. Never worked with this before and the print doesn't define it. We found the spec but the owner doesn't want to spend the money to buy it?

If anyone can give me a hand I would greatly appreciate it.

 

T.I.A.

[Ron Branch @ Verisurf]

I will scan something and send it to you tomorrow if no one chimes in.

 

HTH

[Tim Johnson]

Here's the tool I use.

 

Here are some specs. The thread is 7/16-20. You can machine it in but it will be far less costly to get a tool. The Accuport tool shown above is a sweet tool but it does have a price. You can get the Tosco reamer for less cost but you also get less performance. Metcut and Scientific cutting tools also make reamers. If you're only making a few holes the reamer may be the better choice.

[X-L Engineering Corp]

Tim,

I found that when i did a search but not sure if that is enough info for the tolarences I need to on my Process Print for that operation.

 

Ron,

Appreciate any info you can give me.

 

Thanks

[jeff]

Will this help?

They are in Illinois also, maybe near you?

[X-L Engineering Corp]

Thanks Jeff But the thru hole is 1/8 I need the tool to come to a point. I have noticed even with this spec their are difference in sizes depending on the tool company you look at I would have thought this would be a standard across the board?

 

Thanks again

[Ron Branch @ Verisurf]

Ted, sorry I thought we had that spec all we have are the full MS33649 and other MS port specs, but not that particular one.

 

Sorry