Drill Cycle - Additional Dwell output?

[Newbeeee™]

Hi All,

Fanuc 4axis VMC post.

 

We're using dwell in a drill cycle (csk) and it outputs an additional P value ie:-

 

G82 G98 Z-.9 R5. P500 F250.

X5.5 P1 ####################HERE

X12.

etc

 

In testing, the additional P value is a rounded up (whole no's) G82 line value.

 

Can anyone please shed some light?

Many thanks,

Terry

[GIZMO 21]

yea what's up with that extra p# ?.

[Newbeeee™]

If only I knew!!!

[Justin Beebe at Folsom Tool]

Have you tried the mpmaster post. It works like a charm when using dwell.

[Tim Johnson]

Remove your dwell in pdrill_2$.

 

from;

code:

---

      pcan1, pbld, n$, pxout, pyout, pzout, pcout, prdrlout, dwell,

feed, strcantext, e$

---

to;

code:

---

      pcan1, pbld, n$, pxout, pyout, pzout, pcout, prdrlout,

feed, strcantext, e$

---

[Newbeeee™]

Justin,

Our post is modified so I like to keep with it, but usually compare against the MPMASTER on occasions like this.

But not knowing enough of how the posts work, I did'nt know how the 'Canned drill cycle additional points' interacted with the canned drill cyle.

 

But big thanks Tim, this did the trick.

Thanks a million.

Cheers,

Terry

[GIZMO 21]

mr.johnson,that's what i'm talking about!.