Post Editing Question

[RDub]

I recently updated an old Mori post to be used in X2 MR2. I used the updatepost chook. The problem is that after updating, the post now outputs the drill cycle between pheader and psof when it is the first tool, subsequent tools it puts it before the tool change but after toolend. Any ideas how to move it back? Please and Thank you in advance! Here is a snippet of the posted code...

 

% pheader$ pheader$ 50.

O0000(PROGRAM NAME - FIX MORI POST) pheader$ pheader$ 50.

(PROGRAMMED 01-27-10 @ 15:15) pheader$ pheader$ 50.

(T27) pdrill$ pcomment2 56.

N10G28G91Z0 pdrill$ psafez 56.

N20G90G54.1P7B-90. pdrill$ ppos_cax_lin2 56.

N30G43H27Z3. pdrill$ pdrill$ 56.

N40G98G81X-.73Y-2.7725Z-.7689R-.3689F10. pdrill$ pdrill$ 56.

N50G80 pcanceldc$ pcanceldc$ 58.

T27( 1/4 CENTERDRILL , D27, ) psof$ ptoolcomment 60.

M6 psof$ psof$ 60.

T27 psof$ psof$ 60.

N60G8P1 psof$ psof$ 60.

N70G0G17G40G49G80G90 psof$ psof$ 60.

N80G28G91Z0 psof$ psafez 60.

N90G90G54.1P7B-90. psof$ psof$ 60.

N100G90X-.73Y-2.7725S1800M3 psof$ psof$ 60.

N110M8 psof$ psof$ 60.

N120G43H27Z3. psof$ psof$ 60.

N130M9 peof$ ptoolend_t 60.

N140G91G28Z0.M5 peof$ ptoolend_t 60.

N150G325 Q.01 peof$ ptoolend_t 60.

N160G90 peof$ peof$ 60.

N170M30 peof$ peof$ 60.

% peof$ peof$ 60.

[Colin Gilchrist]

Robert,

 

My guess would be that you have a call to the pdrill$ post block somewhere in pheader.

 

I noticed that you are getting the "bug 2" output that shows you the first and last postblock on each NC code line.

 

If you set the bug 2 to a negative value, you will get all the postblocks labels that have been called in the post even if output did not

occur as a result of executing the instructions in that postblock. This can be useful to see what is getting called.

[Bryan Johnson]

the following change should correct the problem.

 

Modify or add the following line in your PST file.

 

rpd_typ_v7$ : 0

[RDub]

Bryan...

 

 

BRILLIANT!!!

 

Thanks a ton!

[Tom Anderson]

quote:

---

Modify or add the following line in your PST file.

 

rpd_typ_v7$ : 0

---

V7?? That's a reason not to updating posts from old, old versions of Mastercam. You should get a fresh copy of MPMaster and start there!