Large Format Plotter for X4

[AFG]

Can anyone recommend a high-quality large format plotter with drivers that interface well with X4? I'll be using the device to generate large (36" x 120") drawings on mylar material. This is aerospace work and mylars are very common. I'll need to be able to hold +/- .015" over the 120" distance. Any suggestions? Thanks for any input you guys may have. Jim

[kkominiarek]

BUMP...I have a similar need.....any info on plotters that are high accuracy/repeatability.

Up to 36" wide

[Bill Henderson]

I use to use the HP510 designjet. It was very accurate, although I would check on the mediums. Never used it for mylar.

 

42 inch width with unlimited length (roll).

[kkominiarek]

thanks...i'll take a look