Help please

[mcnewb]

Hi, I am using M4, on an Intergrex, when I insert my model, and get the planes and simulation working properly, I G-code out and my x and z are wrong. Can anyone help me on what I am doing wrong.

Thanks.

[Mike S @ S4A]

Your question's a bit vague - you mean the sign of X/Z is reversed?

[mcnewb]

yes, X and Z are reversed.

[mayday]

which model control does it have?

what post?

using G128?

that will swap X,Z like this

 

bore cycle:

 

G17 G53

G30 P2 Y0.

G30 P2 U0. W0.

M302

M200

T2828.0 B21

G30 P2 Y0.

G30 P2 U0. W0.

G97 S850 M203

M250 M212

G98 G0 B101.75 C50.6

M251M210

G128 X0. Y0. Z0. S0 R1

G0 G17 X-1.5292 Y0. Z3.

Z2.

M8M153

G83 Z1.3205 R.338 F2. M210

G80M9

G69.5

G28 U0. Y0.

[mcnewb]

Sorry for my igorance, but where can I find this information? As you can tell per mcnewb, i am really green.

[mcnewb]

Any help me with this. I arranged the part, cut the top holes, wrote the Gcode, everything was correct. I created new views with the relative command, than moved my C/T to the front view. I do the toolpath and it simulates correctly. When I write the code my x should be a positive number, but I am getting a negative number.

[Elmer Fudd]

Check your planes in the view manager.

do not use the back plane. For cutting on the back create a new plane usng lines. Do a search on this subject for more info. HTH. Dan