Wire post out m02

[wfcPain]

Im trying to get my Wire post to post out the G23,M02 and % at the end.

It just posts out g50 instead.

Any direction would be appreciated.

 

 

code:

---

peof            #End of file for non-zero tool           

ptoolend

comment

pbld, n, "G23"

if nchsub > one,

[

" ", e

" ", e

mergesub

clearsub

]

"M02"

"%"

---

[Roger Martin from CNC Software]

If this is an X3 PST...

 

The psof should be psof$

[Lars Christensen]

Try,

code:

---

 peof            #End of file for non-zero tool           

ptoolend

comment

pbld, n$, "G23", e$

if nchsub > one,

[

" ", e$

" ", e$

mergesub$

clearsub$

]

pbld, n$, "M02", e$

"%", e$

---

[Lars Christensen]

Hey Roger is here

wfcPain, with Roger present, I just recommend you do what he says

[Storkman]

looks like a pre-x post to me.

[wfcPain]

Thanks! Yea it was mpwire v9.

I'd like to get rid of the s101 d1 line

I'm new to wire,but i dont think i need a speed

code:

---

O0001

G0 G20 G90

G92 X0. Y0. I1. J0.

G0 X0. Y0.

M60

S101 D1

G41 G1 X-.1846 Y-.0559

G3 X-.20591 Y-.08461 I.00869 J-.02871

X-.17591 Y-.11461 I.03

G1 X.20591

Y.11461

X-.20591

Y-.08461

G3 X-.17591 Y-.11461 I.03

X-.1589 Y-.10933 J.03

G40 G1 X0. Y0.

M50

G23

M02

%

---

[Roger Martin from CNC Software]

You don't say what type of wire machine this is for... Charmille w/ Fanuc control - maybe?

 

But you probably don't want to remove that NC line.

 

Just 'cause it's an 'S' doesn't mean it's a speed. This value is the Condition Code (aka. Power setting) and the 'D' is your Offset Register.

Take take 'D#' out and the 'G41' does nothing and you could scrap a part. ;(

[wfcPain]

Thanks, i can see i need to learn a little before i post.

The operator deletes the line at the machine everytime.I'll learn why.

I need to get a good resource for wire/fanuc controls.