Problems with 2d high speed blend X4

[Jon @ NOWHERE]

Ok here is the problem I am having. I brought in my part into Mastercam, created a new WCS where I want the offset to be. Created the lines to control the blend tool path. When I created the tool path the result is pictured below.

[gcode]

Do you have a depth setting enabled?

 

edit; never mind.. you said 2D.. I was thinking 3D

[3R!< W3NG3R]

I can't help you. But that has happened to me too and I found no solution to it. Sorry.

 

I would send it to QC for them to look at if you can.

[Jon @ NOWHERE]

Its the WCS, I created a new WCS where I wanted the origin to come from. Which the way I brought the part in was in the state it should be for 2nd Op. So I flipped the part upside down and created a new WCS on the bottom left hand corner of the stock. But its like the blend tool path is still trying to reference the TOP WCS. Its driving me nuts.

 

I think this is a direct software issue, so should I bother calling our reseller or go directly to CNC Software?

[3R!< W3NG3R]

email it directly to CNC

[Jon @ NOWHERE]

Sent it off to them. Figured a work around by creating blend path in top wcs so it would come out right. Then saving the toolpath as geometry and deleting all the z moves. Then go into my created wcs and us those lines to drive a contour toolpath with no compensation. Pain in the butt but will do until something like this can be fixed.

[Mike Whitten CAD/CAM Contractors]

I just moved to X4MU3 from X2 a few days ago and found this problem the first time I tried to use the 2D high-speed Blend Mill toolpath. Bummer..I was really hoping Blend would work. I hope they fix it soon.

[Jon @ NOWHERE]

The blend mill toolpath is pretty nice. I just hope they get the WCS fixed in X5.