Anilam Crusader Series M

[Scott PatrickVT AOE Machine Shop]

Regarding:

quote:

---

Ok guys,The VT aerospace machine shop is in dire need of the post files to operate our Anilam Controller on our milling machine.

We are running Windows 7, Anilam Crusader Series M controller, Mastercam X4.

I hope someone in the united states is still using this machine and would share your post files with us.

Much Appreciated.

Scott Patrick

--------------------------------------------------------------------------------

Posts: 4 | From: Blacksburg, va | Registered: Oct 2009 | IP: Logged

 

JParis

 

Moderator

Member # 7931

 

posted 10-01-2010 04:00 PM

--------------------------------------------------------------------------------

Read the FAQ.

 

You should send this post request to your reseller

 

--------------------

Regards,

 

John

 

"We the People are the rightful master of both congress and the courts - not to overthrow the Constitution, but to overthrow the men who pervert the Constitution." Abraham Lincoln

 

 

---

Our Mastercam Reseller has been working for months trying to get us a usable post with no luck. We are getting very frustrated and would like a resolution sometime in this decade...

[gcode]

I believe there is one on the V9 install disc.

It shouldn't be too much work to upgrade it

to your current version

[Mr. Wizzard]

All i can say is, i feel your pain. I'd help if i could, but I don't have that controller, nor do I have a post for it.....

[MACHINEMASTERG]

i have a post for that controller but it's a two axis post it outputs dwells at z moves is your's 3 axis?? if you have you reseller email me ill get it too them

[Guest]

quote:

---

Our Mastercam Reseller has been working for months trying to get us a usable post with no luck. We are getting very frustrated and would like a resolution sometime in this decade...

---

You AGAIN, asked FOR a post.

 

You've not yet asked for help in modifying what you have or posted an issue with your post.

 

Sorry, asking for a post is not allowed.

 

Again, read the FAQ.

quote:

---

Q. Does anyone have a post for a [insert machine or control name here]?

 

A. Ask this question as your first message here and you won't necessarily like the responses you receive. Look to your reseller to supply you with the proper post for your machine, or quote for the work that needs to be done.

 

If you have something and are looking for improvements, it's a reasonable request. Maybe tell us why the post you have needs improvement.

 

Perhaps try to participate a bit on the Forum before you go asking for something. Not unlike Habitat for Humanity, we value Sweat Equity here. Quid pro quo, Clarice.

 

You may also want to let everyone know your company name so that your Hotmail or Yahoo email account doesn't give everyone the impression that you aren't a licensed Mastercam user.

---

Greg, made you a nice offer, I would suggest you either have your reseller contact him or you lets us know what's wrong with what you currently have in hand.