backplot step using left & right mouse buttoms

[John+]

When I did my 9.1 upgrade I lost the ablity to backplot using both L & R mouse buttoms.

The left buttom, single step,works. When I hold both L & R down to speed up back plot I can only single step.

At the same time as M-cam upgrade I also recevied new computer.

So at this point,I'm not sure if it is a setting in M-cam confg. or is it computer setting.

 

Thanks, JB

 

[ 09-25-2003, 11:01 AM: Message edited by: John+ ]

[Mark H]

I had the same problem when I upgraded to 9.1 - it turned out to be the metacut utilities. You need to get the latest file. read this old topic