Misc. values

[Dave1286490654]

Does anyone know about any literature on the miscellaneous values and how to properly use them?

[Guest CNC Apps Guy 1]

The misc. values are values you can use to make differnt things happen in your post or in you r code. You can get the Post Processor Guide on CD-ROM and that should give you a little better insight in how to set it up. Initially you need to decalare what it is. Set up the formatting for it, then make calls to it. Sorry I can't offer up more detail than that but without knowing what you want to accomplish, I need to keep it an generic as possible.

 

HTH

[Jim Whipple]

James:

How much does the Post processor guide CD cost and where does one get one?

Thanks

Jim

[Surface]

While both miss values and mis reals are the same thing. In general, reals are used to insert a value, (eg. mr1=.250) where as integers are used more for turning things on and off, or argument statements within the post (eg. If mi2=1, pcool)

[Roger Martin from CNC Software]

quote:

---

How much does the Post processor guide CD cost and where does one get one?

---

Contact your Dealer for this....

[Guest CNC Apps Guy 1]

It is not a good idea to quote pricing here for a number of reasons. Taxation is different everywhere and because of currency fluctuations it may cost more in one region of the world than another so as always it's best to contact your reseller for pricing, another reason for this is that there may be a special going.

 

JM2C

[Jim Whipple]

quote:

---

Contact your Dealer for this....

---

Allrighty then

Jim