Memory Table Message Error

[EPettus]

I am getting Memory Table Message : Memory Table Item Not Found (9) or (12). Can anyone tell me what this is referring to I can find anything in the books I have. I do not know whether a file or something is missing or bad. Anything would be appreciated.

[Guest CNC Apps Guy 1]

Check out this thread;

 

Memory Table

 

.... or do a search for "Memory Table" and check out the responses.

 

HTH

[EPettus]

James or anyone in the know,

 

I checked out those threads. Am I correct saying this is a floating bug that has not got a clear answer as of now or am I have I been lead into left field by own stupidity. However, is it going to be causing me big problems in future or should I be concerned. Let me know.

 

[ 11-18-2002, 02:12 PM: Message edited by: EPettus ]

[Guest CNC Apps Guy 1]

quote:

---

...Am I correct saying this is a floating bug that has not got a clear answer...

---

Without having read those threads thoroughly, you're probably on the right track.

 

Can you repeat the error? In other words, can you "make" it happen or does it appear randomly on certain parts, or on one part in particular? Was this part imported or did you draw it from scratch in Mastercam? SOrry for the thousand questions, just trying to help find a solution if possible.

[EPettus]

It is a random thing, I am not sure how to make it repeat, but it seems to be occuring more here later, yet I can explain it. It is a imported part from in-house drawings on ACAD 2000i, as basically all mine are. Do not worry about the Questions, If I knew everything about it I would not be asking all of you these thousand questions.

[gcode]

Sometimes running the ramsaver utility in the

File menu will correct this problem. Sometimes it won't.

[Guest CNC Apps Guy 1]

Perhaps there are unsupported entities in your DWG file and that is contributing to the problem ?????

 

Hmmmm. Do you get this error as you are creating something?

[EPettus]

It is most commonly popping up when I go to save the file. There is a ocassionally occurs when I go to put a single simple text note w/o leader from my normal default of note w/ leader. Any ideas or suggestions appreciated.

[Alias]

It has to do with drafting entities. Got some bad dimensions or text in your file? Try regenerating all your dimensions, filing the mc9 file and recalling it to *maybe* filter out the bad ones.

[Guest CNC Apps Guy 1]

Haggis Stuffer ROFLMAO

 

 

Nice occupation, Anos

[Laz]

i ve gotten a few of those memory table errors reciently. i had mc running twice on the same machine and needed to check on an original dwg file whilst dimensioning modificaions on another