I am in a need for a old post for Kitamura

[cadcam]

We have some old MyCenter1 with 3M & 6M controls.

The MPfan get close but if any of you guys or gals have one of these with it setup I would really appreciate.

 

James How about you bud.

 

Were is limtless cretivty when you need him.

 

thanks guys.

 

[ 11-19-2002, 06:15 PM: Message edited by: cadcam ]

[limitless creativity]

Thats

MR LIMITLESS CREATIVITY TO YOU

 

Mike

[cadcam]

What up Mike?

How is life treating you?

[limitless creativity]

Doing good,

 

Still here, Did not make the jump, It just did not work out.

How are you doing?

There is an Open house at Machinery Sales tommorrow from 10:00 am to 4:00 pm.

 

4400 S. Soto st.

Los Angeles

 

If you can make it stop by, I got CCC to get them V9, and to start promoting MC.

 

Also if any one else can make please stop by.

We have 5 Machines on their floor to show

 

Mike

[Guest CNC Apps Guy 1]

Sorry man, no Kitamura Posts.

 

If you need something in particular let me know and maybe I can work some magic for you.

 

E-mail me at home.

[cadcam]

Mike how was the open house sorry I did not make it had some work and I was suppose to go to Haas open house in torrence.

After that I had to teach in North Hollywood.

 

James thanks I might just get with you.

 

thanks all

[pip]

We have a Mycenter M6 Post. I dont know much about the machine. Ours is twin pallet 16 tools. If that is the same as yours I can send you ours.

[Hugh.Venables]

Jay, on page 5 of "please post here if you are new to the forum" there was a post from ROBUNDERTHESTAIRS who was working a couple of Kitamuras in the UK.

Cheerio, Hugh Venables.

[Scott Bond]

Have you contacted your local MCam Dealer?

[cadcam]

I should of expected someone to say that.

Ya know what I did not.How dumb is that?

[Rekd™]

Jay,

 

If you haven't found one yet, I have one for a mycenter 3. Prestaged tools, program stop, GON, GOFF contour control, and some other things in Misc. Values, plus a drill cycle used for part location with what I call a Tool Stop or Drop Stop. (Locating pin in spindle, great when you need to stop agains a surface that you can't put a hard stop on, or will be cutting.)

 

If interested, lemme know.

 

-Rekd

[cadcam]

Reked I emailed you so you know.

Saying thanks but not at this time.