get rid of g54,etc on Okuma post

[rjohnson58]

I have tryed everything to get rid of the g54,g54 etc in the Okuma post.Must be a simple

answer but havn't found it.

Thanks

[iowajim62]

Have you tried the # sign ?

[Allan Brown]

Depends on the post, but usually a call to pwcs is responsible. The workofs and mi1 variables may play a roll.

[Trevor Bailey]

Contact your dealer for fast, simple changes like that until you are able to dig into your post yourself and not screw anything up. They will usely tell/show you how the changes were made. It is also good to keep them in the loop as to machine specific/programmer specific needs in their area.

[md]

Ln 1630

 

# Default Miscellaneous Integer Values

# --------------------------------------------------------------------------

301. Work Coordinates [0-1=G92, 2=G15 Hxx's] (mi1)? 2

302. Absolute or Incremental [0=ABS, 1=INC] (mi2)? 0

 

That should work if it dosent let me know

[foolsh]

My post (fanuc default MPV8.1)even with a pwcs doesnt output any work offsets,i thought it will do automatically.now i am using a MI=2 for G54 output even though in my tool plane it was greyed out -1?!

[Guest]

-1 is what is called "automatic"

it will generally output the next available offset, usually G54

 

How are the calls to p_wcs setup and what does your p_wcs section in the post look like?

[foolsh]

there is also a g_wcs,but with a -1,there was no automatic posting of G54 only G90.this post is a generic fanuc post MPV8.1