Get from library

[Henk]

When I get operations from library, the drill-ops allways come with coolant-off.

The original operation and in the toolprm is coolant-flood, the mill-ops come with the correct coolant.

Is there a way to get the right coolant?

 

 

V9.0 SP1 Mill 3

[Surface]

Is the box "use tools step, peck, coolant" checked?

[Henk]

where can I find tihs box

[MACHINEMASTERG]

right click on the tool in the ops mgr on the last page where the rpms and feedrates are

[cadcam]

quote:

---

Is the box "use tools step, peck, coolant" checked?

---

Henk go into the Job Setup and look to the left at the check boxs.

 

As for MACHINEMASTERG was saying was to setup in the tool info (on the last tab under tool defanetion)the stuff like you are asking to have active.

[Henk]

Surface and Machinemasterg,

 

quote:

---

the box "use tools step, peck, coolant

---

I named this the "toolprm", and that was checked.

 

CADCAM,

 

I checked the jobsetup, switched the "use tools step, peck, coolant" on, and that works!

 

You all thanks for help