Agie 100 programming

[Teh Bear without Brains kinda idiot]

Hi ,folx!

 

We recently got antic Agie100 Wirecut Edm .

No books and not matchng postprocessor.

The postprocessor my dealer gave me produce only geo file and does not generates job fle .

Suppose I have this files :

job file

CUT100 COMPLETE MM

CNC RES

CNC SAV RETRY FROM : 9 TIMES WITH T00 TECH SKIP STP IF NOT THREAD STOP

TEC St_1_10

CNC HOL CW

CNC TAP P01=+00.00

GEO 450\450 EXEC STP EXEC WIE EXEC T01 EXEC S01 FROM 001 TO 999

MAC WIE

FIN

 

and geo file

% N100 M63

N110 D01 P01 S01 T01 G43

N120 G01 X+028168 Y-000005 G44

N130 G01 X-000003 Y-016000 G40

N140 G03 X+000938 Y+000653 I+000000 J+001000 G44

N150 G02 X+005767 Y-008285 I+005768 J-002135

N160 G01 X-006549 Y+000001

N170 G03 X-001550 Y+000001 I-000775 J+000000

N180 G01 X-000675 Y+000000

N190 G03 X-001000 Y-001000 I+000000 J-001000

N200 G01 X-000003 Y-016469

N210 G01 X-028168 Y+000005

N220 G03 X-000938 Y-000653 I+000000 J-001000

N230 G02 X-005767 Y+008285 I-005768 J+002135

N240 G01 X+008774 Y-000002

N250 G03 X+001000 Y+001000 I+000000 J+001000

N260 G01 X+000003 Y+016069 G44

N270 G01 Y+001000

N280 G01 X-001000 Y+000000 G40

N290 G45 M22 M02

 

WhaT exactly

EXEC STP EXEC WIE and MAC WIE means ?

What is a code for a quick return to the starting point ?

 

If someone has list of codes for job and geo files I will be very

thankful cause it is pain in the xxxx to program by try and guess way.

 

Best regards

[cam-eleon]

This was the first wire I ever prog.--- many years ago.

Here is a site that may help

 

http://www.cam-1.com/Agie_programming.htm