X5 OptiRough Toolpath

[Ocean Lacky™]

Hoping some Beta Testers can share some info on the new toolpath.

 

I've noticed that it takes considerably longer to generate a toolpath than the HSM Area Clear....Is this typical?

[neurosis]

Hoping some Beta Testers can share some info on the new toolpath.

 

I've noticed that it takes considerably longer to generate a toolpath than the HSM Area Clear....Is this typical?

 

 

I've used it to program two parts already that I was previously using SHS Core roughing on. It works very good for the parts that I chose to try it on. We are just getting ready to run one of them now. It is a 15-5 part heat treated to RC42.

 

It took a couple of times to get the settings adjusted correctly.

 

 

I will say one thing.. I do need a new computer to use the Machine Simulation. I cant even see the machine move at all.

[The_Evil_Machinist]

I've noticed that it takes considerably longer to generate a toolpath than the HSM Area Clear

 

I've noticed that with opti-rough and hybrid.