No GUI setup sheet in X5??

[RandleXX]

This will keep me from ever using X5. The GUI tool list was perfect and integrated perfectly into our work instructions. I did create a simple Active Report tool list, but it's far too slow and clunky with forced screen shots and all that crap.. All we need is a simple tool/holder list. Disappointed with X5...

[Guest]

No, the option was removed in X5.

 

it's .set or Active Reports's

[MIKE_B]

That a bummer! I used GUI for simple 1 time jobs and fixtures, etc. worked great

[Guest CNC Apps Guy 1]

X+ ???

[RandleXX]

Is there a way turn off all the screen captures in Active Reports ?? If that was possible, I think active reports would be the ticket.

[Guest]

To do a simple tool list, try this, tool manager, right click in the upper window, choose report.

 

hth

 

[Brad Lisle]

Is there a way turn off all the screen captures in Active Reports ?? If that was possible, I think active reports would be the ticket.

 

 

Have you gone through the active report guide? You should be able to remove the image section of the report. I know you can also create your own tool list sheet without all the images too.

[RandleXX]

To do a simple tool list, try this, tool manager, right click in the upper window, choose report.

 

hth

 

 

You rock!!! Thanks!!

 

It's been there the whole time, just one of those buttons I never tried..

[MIKE_B]

John that is all that I need! Thanks....."insert old cheers here"

[RandleXX]

It sure would be nice to be able to select operations from the tree and run a report on them other than "setup sheet". Like grab 3 or 4 operations and run a simple tool list or custom report on just those operations. X6 wishlist I suppose..