Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Dynamic facing issues?


Bob W.
 Share

Recommended Posts

I started a part with a dynamic facing toolpath using a 1/2" end mill with no corner radius. I was left with a strip down the center that measured .015" thick. Is there any way around this? Is there a way to specify an overlap in the center region at the end of the toolpath? It was a PITA because I had to stop the machine and break these off by hand. I was only doing four parts so it wasn't worth the time to add another toolpath to fix it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...