2D Area Mill

[NOTW Programmer]

Hello guys,

 

I am pocketing a 3.75 x 1.63 x 1.125 deep pocket, I chose to use 2D Area Mill at full depth .05woc 7000rpm 70ipm, I have two questions:

 

* What feed rate should I use for the helical entry

 

* Why is the first cut after entry a full width cut and will this damage the toll. I've seen this done but in aluminum I am cutting SS304.

 

Thx !

[Mic6]

My want to try Dynamic

[Goldorak]

My want to try Dynamic

 

x 100000 i never use area mill since dynamic exist