change default for when I pick tap

[rgollar]

Im using MX5 and using a fadal post inch. My question is when I pick a tap it automatical picks G84. But is there a way to make it pick G84.1 as a default instead when a tap is selected? Thanks in advance.

[Superman]

*** copy your post ***

 

find in your post

sg73    G73     #chip break - no dwell 
sg73d   G73     #chip break - with dwell 
sg84    G84     #tap        - right hand
sg84d   G74     #tap        - left hand
sg85    G85     #bore #1    - no dwell 
sg85d   G89     #bore #1    - with dwell 
sg86    G86     #bore #2    - no dwell 

 

and change to

sg73    G73     #chip break - no dwell 
sg73d   G73     #chip break - with dwell 
sg84   G84.1     #tap        - right hand
sg84d  G74.1    #tap        - left hand
sg85    G85     #bore #1    - no dwell 
sg85d   G89     #bore #1    - with dwell 
sg86    G86     #bore #2    - no dwell 

 

You could also change then in the text section at the bottom of the post

 

 

[rgollar]

Thank you I will give that a try.