Slow feed on finish passes of pocket

[Thee Rickster ™]

X4 MU3

 

I machine graphite only. (entire mold is Graphite)

 

I do some insert pockets using a 1/4" em the reach could be a long as 4 inches

but the poket 3/4" deep

 

I use a .05 stepdown and for finish cuts I use '3' and finish step '0', as to take 3 deflection cuts.

 

I use a 40 feed. I would like the finish '3' cuts, to feed at 20 or less.

 

Is there a way to do this with out creating a 2nd path only cutting the final depth?

 

Any help will be greatly appreciated

 

Cheers

Rick

[Columbo™]

Rick,

 

Couldn't you change the points in toolpath editor??? [edit point ~ feedrate]

 

Or am I not understanding what you want?

[Mic6]

Sounds to me like 1 more operation would have you goin by now

[K2csq7]

Rick, 2D Pocket toolpath? Finishing tab under cut params. I see "override feed speed" in the top right...

[Thee Rickster ™]

Thanks Kieth!

 

Karma for you

 

Cheers

Rick

[Thee Rickster ™]

Sounds to me like 1 more operation would have you goin by now

 

 

Yeah, but for the future...hope and change!!....

(but only in Canada)