Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Verify Shading


Mic6
 Share

Recommended Posts

So I've beenhaving some graphical issues lately, yesterday I updated my Nvidia driver to the latest, and most, if not all of the quirks went away. Although the one that is bugging me still is my verify is almost blacked out. I see some light shining on a corner, but no matter where I rotate it, I can't see anything happening. HELP!? TIA

 

 

4fa9b033.jpg

 

 

 

Slightly Rotated

 

 

6e629db7.jpg

Link to comment
Share on other sites

Is that a new card that you just got? I'm assuming it's the one that's in your signature. Was everything working fine before and what changed to cause the problems. We rarely see any issues with those cards.

 

I've seen cases where rolling the drivers back to an older version fixed the problems but that's a bit of a long shot.

Link to comment
Share on other sites

check the Shading page in Sytem Config and see if any of the Spotlight options are turned on.

Normally they are all off.

 

and on the Screen page..

Open GL and "disable Front Buffer"

should be checked..

If you change either of those, you'll need to restart Mastercam

Link to comment
Share on other sites

Hey Matt. Card came in the machine, which I got a few months ago. Yes, signiture values are current. A lot of things were tweaking out on me, verify speed, zoom windows going crazy, then I installed the latest driver update and it fixed a lot of stuff. No matter what I change in my Shading settings, I get no results.

 

 

P.S.- Does anybody elses Ops Manager icons disappear when the mouse pointer leaves the Ops manager window?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...