File errors on new Windows 7 install

[n_tydingco]

We have been slowly replacing our old XP workstations with newer Windows 7 64-bit (enterprise edition) machines and I have come upon errors that I have not seen before. Has anyone else encountered them or know how to get fix them.

 

The (Mastercam X Editor) message box reads: "Invalid procedure call or argument C:\Documents and Settings\All Users\Documents\shared mcamx5\common\editors\Mastercam\Memberlists\entities.mbr"

 

click "OK" and this message follows:

"An error has occured in sub OpenFile()

The parameter is incorrect.

#-2147024809

C:\DOCUMENTS AND SETTINGS\ALL USERS\DOCUMENTS\SHARED MCAMX5\-001.NC

 

 

Thanks,

Norbert

[Tedman]

We have been slowly replacing our old XP workstations with newer Windows 7 64-bit (enterprise edition) machines and I have come upon errors that I have not seen before. Has anyone else encountered them or know how to get fix them.

 

The (Mastercam X Editor) message box reads: "Invalid procedure call or argument C:\Documents and Settings\All Users\Documents\shared mcamx5\common\editors\Mastercam\Memberlists\entities.mbr"

 

click "OK" and this message follows:

"An error has occured in sub OpenFile()

The parameter is incorrect.

#-2147024809

C:\DOCUMENTS AND SETTINGS\ALL USERS\DOCUMENTS\SHARED MCAMX5\-001.NC

 

 

Thanks,

Norbert

 

 

 

Norbert,

 

I am having the exact same problem after upgrading to a high end BOXX computer with Windows 7 on it. If you, or anyone out there, do find the cause or solution, please let me know.

 

Thanks,

Chris

[Jayson Kramer]

Are you guys loading from a disk or download from the MC site?

 

 

[Tedman]

I found the problem; it is with the config file. The mcamx.config file, which has my personal settings, from last computer was causing the problem. I erased it and re configured from within mastercam. Hope this helps.

Thanks,

Chris

[CJep]

You may want to check this link concerning McamX5 config files.

 

McamX5 Config