Semi OT- Need help with backplot in Predator Editor

[JMWorks]

I am trying to use the backplot feature with the Predator Editor and DNC our company purchased and am having no luck. Since very little info if any comes with the software about how to use it. I see there is a part where it says you must define a "predator header" block to show 3d solid models in back plot but all I am after at this point is simple wire diagrams. Anyone with some expierence with this, your help would be much appreciated as I am finding out support from Predator is terrible here with our salesrep.

[JMWorks]

Evidently no Predator users here...?

 

 

[Hardmill]

Evidently no Predator users here...?

 

Evidently so

 

Sit tight, im sure someone will chime in.

There are several users here for sure

 

 

 

 

 

 

 

 

 

 

 

PEACE

[Jayson Kramer]

Look in the predator editor sample NC files they show a sample of the stock call outs.I don't have my Predator stuff installed on this computer.

Also you can call the office of www.Shopfloorautomations.com and Greg there will help you tell them Jay sent you

[Jayson Kramer]

Ps Also the MPmaster post from this site supports out puting from MC the stock size defined in your file for this exact resin.it is an option in the post.

[OC_THE MCX]

I have had nothing but problems with Predator in the past and I dont like it. The Backplot would crash my computer. I have been using CIMCO EDIT with Backplot for years now with no problems whatsoever. IMHO, The best Editor on the market! Cant stand to use anyting else. Download the Demo and check it out. Also, Way,way less expensive than Predator!!!! Less than $*** a seat.