Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Tapping Cycle Problem


#Rekd™
 Share

Recommended Posts

Hi,

 

My machine is hanging up on the G80 (line 480) at the end of the tapping cycle. Fanuc Oi-MB control.

 

I was using X3 on this one, I tried X5 and it is the same code.

 

Any Ideas?

 

Here is the code:

 

N370 T14

N380 M06

N390 G100

N400 (MAX - Z2.)

N410 (MIN - Z-.27)

N420 G00 G90 G54 X.288 Y.1942 S50 M03

N430 G43 H14 Z2. M08

N440 M05

N450 M29 S50

N460 G98 G84 Z-.27 R.1 F1.25

N470 Y-1.0058

N480 G80

N490 M09

N500 G200

N510 M06 T22

N520 M30

%

 

Thanks

 

John

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Follow us

×
×
  • Create New...