Sub Spindle rad's reversed

[mroy0404]

Hello Guys

 

 

Im using X5 and all my rad's that need to be machined in the Sub Spindle seem to be reversed in the verify, and in backplot simulation all looks to be ok. It more less looks to be changing the rads into large chamfers.The contour has not changed at all just the tool path is out of wack, Has anyone seen this problem before??

 

 

 

 

[NOTW Programmer]

Hello Guys

 

 

Im using X5 and all my rad's that need to be machined in the Sub Spindle seem to be reversed in the verify, and in backplot simulation all looks to be ok. It more less looks to be changing the rads into large chamfers.The contour has not changed at all just the tool path is out of wack, Has anyone seen this problem before??

 

 

 

 

Upload the MCX or give us the sizes so we can create a replica of the part and reprogram it.

[Chris In-House Solutions]

If you are on current maintenance or your maintenance expired after April 27, 2011 I would recommend you try downloading MU1, regenerating the program and seeing if that makes a difference.

 

If that doesn't work then a sample file or sizes would be great.