"not all operations are selected for posting. post all?"

[Tim Pruett]

I'm sure this has been covered but I did a search and could'nt find anything. Whenever I select a few programs and post them mastercam gives me a window that states "not all operations have been selected for ......, post all? Is there a way to turn this box off so it doesn't ask me this everytime. I never post every single program in my operations manager at the same time. I always do it by groups. tia

[Mark V.]

In your config under toolpaths check suppress associativity warning messages.

[Tim Pruett]

I knew I should've asked this question a long time ago. Thanks Mark, you da man.

[Goldorak]

right click in the operation manager > edit selected operations > change NC file name

 

that's it

[K2csq7]

I didn't know that would stop the "do you want to post all" warnings....

 

 

FYI !!!!!!!!!!!!!!!!!!!!!!!

But I do know that it will stop the warnings you get when you try and delete geo that is associated with a toolpath...

[Goldorak]

I didn't know that would stop the "do you want to post all" warnings....

 

 

FYI !!!!!!!!!!!!!!!!!!!!!!!

But I do know that it will stop the warnings you get when you try and delete geo that is associated with a toolpath...

 

 

yep , and if you miss one operation in the posting process it can finish in a HUGE crash