Rotation from"A" to "B" in post

[cadcam]

Please tell me how to change the out put from "A" to "B".

I am drawing a big blank just got done adjusting a post for our Mazak and the 4th is a "B" not an "A". I am tired know it is some thing simple but can't remeber. thanks guys

[Mark C]

Jay,

I think this is what you want:

 

# --------------------------------------------------------------------------

# Rotary Axis Settings

# --------------------------------------------------------------------------

srotary "B" #Rotary axis prefix

vmc : 0 #0 = Horizontal Machine, 1 = Vertical Mill

rot_on_x : 2 #Default Rotary Axis Orientation, See ques. 164.

#0 = Off, 1 = About X, 2 = About Y, 3 = About Z

 

[cadcam]

Mark thanks for the reply. but that top line defining the Rotation is not there.

quote:

---

srotary "B" #Rotary axis prefix

---

I am using the MPfan psot to build off of.

Every thing after that line is there I to thought it was a simple toggle.

[Roger Peterson]

Look for the formating of cabs, and cinc

 

 

HTH

[chris m]

Jay, to elaborate...

 

fmt A 11 cabs #C axis position

fmt A 14 cinc #C axis position

 

Change 'A' to 'B'

 

Seems wierd, probably a better way, but this should work

[iowajim62]

Hi Jay,

 

Here ya go,

 

fmt B 11 cabs #C axis position

fmt B 14 cinc #C axis position

fmt B 4 indx_out #Index position

[cadcam]

Chris M that is what I was looking for sir..

Thank you all.Like alwas you all are vary helpful..

 

Too the nice guys that emailed me Thang vary much for sharing.

 

Now I owe one to you guys.

[Greg Williams]

Jay,

 

I have done it as Chris shows above and my post works fine