X6: Disappearing Geometry After Backplot

[CamNinja]

Has anyone else had this happen? If I run my backplot all the way thru I lose the ability to see my geometry. The only way I can make it reappear is to start backploting again and escape out. Im running 32bit

[gcode]

what video card are you running

[Jroc85]

Can't say that I've had this problem.

[CamNinja]

what video card are you running

 

ATI Radeon X300/X500/X1050 Series

[gcode]

not an optimal card for Mastercam...

did X5 behave properly??

I'm trying to think of a setting that could cause this, but nothing comes to mind..

[CamNinja]

not an optimal card for Mastercam...

did X5 behave properly??

I'm trying to think of a setting that could cause this, but nothing comes to mind..

 

X5 never did it, must be my computer I have tons of issues with solids but not usaully with lines and arcs.

[gcode]

do yourself a favour.. and get a Quadro video card..

if Quadro's are too rich for your blood, get a high end GeForce gaming card.

Either will solve a lot of the issues you are experiencing..

Mastercam and ATI video cards do not play well together.

[overthecrossbar]

Clicking repaint should also bring back your geometry in this case.

[gcode]

or hitting F3

[CamNinja]

do yourself a favour.. and get a Quadro video card..

if Quadro's are too rich for your blood, get a high end GeForce gaming card.

Either will solve a lot of the issues you are experiencing..

Mastercam and ATI video cards do not play well together.

 

I know, I just got them to let me get rid of my CRT another computer is not gonna happen.

 

 

Clicking repaint should also bring back your geometry in this case.

 

Does not work

 

 

or hitting F3

 

 

Does not work

 

 

 

The screen statistics show all the lines, tools, and operations but the screen is blank until I rerun backplot and escape out before it finishes.