New setupsheet, supports Excel/HTML

[Günther Massimo - GMCCS]

Hi all,

 

if you are interested you can download ncdatasheet for Mastercam V9.1 here .

 

- easy to setup your output (see setup dialog ).

- output can be horizontally or vertically.

- output can be either in Excel or HTML format (see excel.jpg , html.jpg ).

- automatically add a screenshot to the output.

- automatically add a company logo to the output.

 

To add a company logo you need to put a logo.gif file in your Mastercam folder that's all.

All other stuff can be done from the setup dialog.

 

Before you run ncdatasheet, make sure you have valid operations selected in your OP-Manager.

If you use it with large programms, have attention to the speed. It's really fast.

 

Also a new button was added to MCUtils to have quick access to ncdatasheet from the OP-Manager.

Please contact Andreas Stute from Intercam to get it.

 

 

Note: currently it will run only on dealer and educational sims,

also I could test it only on Win2000, IE6.0, Excel9.0

 

 

Any comments are welcome.

 

[ 09-25-2003, 10:02 AM: Message edited by: Gismo ]

[Keith M]

sounds like a realy nice feature to bad I am still on 8.1 .

[Keith Graydon]

Great, Does it support NetHasp?

[Günther Massimo - GMCCS]

Yes, but should be Dealer NetHasp

[Rekd™]

quote:

---

Note: currently it will run only on dealer and educational sims,

---

 

'Rekd teh pouting

[Trevor Bailey]

I have just tried the file. I am having a couple of problems. I sent you an e-mail.

 

Could you send the reply to [email protected]

 

Thanks

[Günther Massimo - GMCCS]

Trevor,

 

please send your mail to [email protected]

[Trevor Bailey]

Message away.