Keith M
-
Posts
67 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Keith M
-
It will be in the southern area it is near atlantic city.Sorry I couldn't add any thing today I didn't have internt access.
-
Can anyone tell me the cost of live in new jersey? Is it higher or lower the average? I am talking to a company from there and they want to make me a offer and I was just wondering what I should expect. I have looked it up on msn and it said that the cost of living is about the same as where I am from. Anyone that info I would like some input . Thank You
-
Are the parts mainly IRL parts?
-
To create something "Idiot Proof" you will have to get ride of all of the Idiots, Because someone is always dumber then they look. Where I work they want us to make everything fool proof so I told them to stop hiring fools. It didn't go over real big.
-
I don't have to go to work I just have to take the laptop home and do work there.
-
I used SmartCam and Ideas when smartcam got rolled over into it and I have used edge cam and can say that was the worst cad cam software I have ever seen. I have used Master Cam for about 3 years now and love it. I think that smartcam had a few different opitions for tool paths but you learn different ways around them in a hurry. I still like ideas alot also.
-
You could try Hemly Tool Supply Indurtrial Tool Division. They are in Montville Ohio. Phone 440-968-3228. They have several building so they may give you another number to a different building. They deal with surplus and used tool holders.
-
I have 10 years in the trade and 4 different shops.
-
What machine are trying to edit a post for??
-
What do you mean double post? Is programing the same. I think that it would be or at least close.
-
Can anyone tell me the deference betwwen a 5-axis router and a 5-axis mill.
-
I think that you may want to read the FQA,s. You may take a little heat for this one.
-
I know there is a software named GREV5. It work ok with lines and arcs. I have used it onsome of our trimming files.
-
i Used to sink drop hammer dies. Has any one ever machined wedge roll dies or transverse roll dies. they are a lot of fun on a 3 axis machine. also made dies for a # 23 die forger air hammer made by chambersbugr. The good old days.
-
Do you of any newpapers that have web sites that I could look at? If so could you post tha addresses or e-mail them to me. Thank You
-
I live in Greenville. It's just south of Meadville. Or half way between Pittsburg and Erie.
-
When we get in any file that is not what we normal receive we have use rinho to convert it the only problem is our operator is off today but will be back monday. Let me know if that might work.
-
Yes I used air blast and G09 dose shut off air blast. In general it shuts off all coolant that I know of.
-
I am not sure if will work? Is this the one http://www.emastercam.com/ubb/ultimatebb.p...t=006075#000000 Is there anyone down there doing any hiring? My wife and I have been thinking of moveing south.
-
I still use 7.2 We have one machine that nobody ever worked with the post to undate it so I have to program it in 7.2
-
I use air all the time with insert cutters. I found that coolant would fracture the insert.
-
If post writing were that easiy everyone would be able to do it. When someone takes the time and money to learn this then expecte that they will charge to write a post for you, Or while else would they take the time and money to do it.
-
It sounds a lot like finkle # 1 die block. I cut that stuff. I used a lot of indexable insert cutters. I think i used about 50 surface feed. If you have so questions on what cutters i used and speeds and feed please e-mail me.
-
New setupsheet, supports Excel/HTML
Keith M replied to Günther Massimo - GMCCS's topic in Industrial Forum
sounds like a realy nice feature to bad I am still on 8.1 . -
Is that a die material?