DEMO DISK

[CEMENTHEAD]

Is there a download still available somewhere for Mastercam Demo disks? We had one a few years back we could send home with future programmers for training, They were limited to No Posting and No Saving. But still a great tool for Newbies or Sizing up material & getting cycle times.

[Lindsay W @ In-House Solutions]

Is there a download still available somewhere for Mastercam Demo disks? We had one a few years back we could send home with future programmers for training, They were limited to No Posting and No Saving. But still a great tool for Newbies or Sizing up material & getting cycle times.

 

We definitely have the demo disk (Home Learning Edition) available. Please contact your reseller for the download.

 

Thanks

[CNCzx10r]

is there anything to use to figure out how to use the demo disk (example: instructions on how to use mastercam x6 not how to install)? I have mine installed but can't find anything to figure it out with. like an "instructional video" that shows you how to use mastercam x6.

Thanks.

[gcode]

Try here InHouse Book Store

[Tyler Y]

I trust you were able to find another demo disc CementHead.

 

But for others that might come across this, here's some further info:

 

- The new "Home Learning Edition" Demo discs (since X4) have allowed users to save their work.

- Anyone who makes a purchase through the store here (www.emastercam.com/store) gets to download the HLE for free.

- Otherwise, as Lindsay pointed out, you can request it through your Local Mastercam Reseller