Flatten geo from solid round

[Darin]

Hello,

 

 

Is there a way in Mastercam to flatten the wire frame geometry from a solid ? Like if there is a cutout on a round and I want the geo flat...

[Hardmill]

EDITED BECAUSE I WASNT PAYIN ATTENTION

 

 

 

 

 

PEACE

[John Summers]

Xform Roll --- You can either roll or unroll about an axis.

[Hardmill]

Xform Roll --- You can either roll or unroll about an axis.

 

 

:headbonk: Thanks John

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PEACE

[Darin]

Thanks guys... I got the chook to work only with my 90 deg geo in front view.... I tried everything in th chook to get the top cutout you see here to come out... It would only use the outside profile of the part... Then I tried Xform project and that worked for the top geo cutout on the solid round... Is there a trick to the chook? Couldn't get Xform roll to work right either... I was on top view it it looked like the pics... What is the trick for that top cutout on the round solid?

[Hardmill]

If your tryin to also get the pocket use create curve slice

Then you can xform project the geo wherever you like.

Put your file up if you can and we can show you

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PEACE