HELP, HELP, HELP!!!!!!

[WarLordApoc]

Hi guys, new to the forums but need some major help or links to where I can find information. I started a new job Monday as a CNC Lathe Programmer and they are pushing me to use the Live Tooling on our lathe. Heres the only problem. I have very little experience programming the C-Axis in MasterCAM to program from solids. Can anyone give me any help. I need as much assistance as I can get! I can figure certain things out by just messing around with the C-Axis programming controls. But they want me to machine "off-center" flats along the Z-Axis. I cant bring anything home from work with me to mess around, so im stuck trying to figure out how to program on the job. Again guys please please help! Email me directly if you want, [email protected]

[Jeremy Herron@DBS Solutions™]

Shoot me a .z2g at [email protected] and I will take a look.

[WarLordApoc]

Shoot me a .z2g at [email protected] and I will take a look.

 

Ill see if i can get one sent out to you tomorrow. My IT guy monitors almost everything we do on these machines.

[#Rekd™]

Ill see if i can get one sent out to you tomorrow. My IT guy monitors almost everything we do on these machines.

 

Jeremy will help you out, the guy is a "mavin" at this stuff! :unworthy:

[Trevor Bailey]

also download the mplmaster post from this site. with the post, it includes a decent how-to for the c-ax, part flip, etc...