How do I list all available work offset in the program that I have?

[PcRobotic]

Hi,

I'm having problem to list all the work offsets of which I have in the program such as G54, G55, G56 and so on. Below here I have my post and would like the to list like the way I wish to as note

 

 

 

Deeply need your helps and appreciated for your time.

 

#############################################

%

O0000 (TEST PROGRAM)

(This Post Is Only For - HAAS)

(Unproven/ Proven By: )

(ALUMINUM INCH - 2024)

 

(***** Posted Date And Time *****)

(JUL.05.2012 @ 3:26PM)

(Source - C:\USERS\STEVEN\DESKTOP\TEST PROGRAM.MCX-5)

(NC - C:\USERS\STEVEN\DOCUMENTS\MY MCAMX5\MILL\NC\PROGRAM NAME HERE.NC)

 

(****** Note From Programmer ******)

(MANUAL ENTRY AREA FROM PROGRAMMER)

(PROGRAMMER WANTS ABC SETUP)

(SETUP - MAN MUST FOLLOW EDF)

(CONFIRM FIRST ARTICALS TO Q.C)

 

(********* Tool List Info *********)

(T1 -3" FACE MILL - H1 - D1)

(T2 - 1/2 FLAT ENDMILL - H2 - D2)

(T4 - 1/4 DRILL - H4 - D4)

(T3 - 3/8-16 TAPRH - H3 - D3)

(T5 - 3/8 FLAT ENDMILL - H5 - D5 - R0.0500")

 

(******* Work Offset List *******)

G0 G90 G54 (I typed this line manually and would like the post will automatically list out for me)

G0 G90 G55 (I typed this line manually and would like the post will automatically list out for me)

G0 G90 G56 (I typed this line manually and would like the post will automatically list out for me)

G0 G90 G57 (I typed this line manually and would like the post will automatically list out for me)

G0 G90 G58 (I typed this line manually and would like the post will automatically list out for me)

 

N1 ( CHECK INSERTS BEFORE RUNNING )

G91 G28 Z0

G0 G17 G40 G49 G80 G90

T1 M06 (3" FACE MILL)

G0 G90 G54 X-8.3 Y-.7501 S6000 M3

G43 H1 Z2. T2 M8

Z.2 G1 Z-.0001 F100.

X1.8 F50.

Y-2.2499

X-8.3

G0 Z2. M5

G91 G28 Z0 M9

M1

 

N2(USE OLD END MILLS AS POSSIBLE)

G91 G28 Z0

G0 G17 G40 G49 G80 G90

T2 M06 ( 1/2 FLAT ENDMILL)

G0 G90 G55 X-3. Y1.25 S8000 M3

G43 H2 Z2. T4 M8

Z.2 G1 Z-1. F100.

G41 D2 Y.75 F30.

G3 X-2.5 Y.25 I.5 J0.

G1 X0.

G2 X.25 Y0. I0. J-.25

G1 Y-3.

G2 X0. Y-3.25 I-.25 J0.

G1 X-5.

G2 X-5.25 Y-3. I0. J.25

G1 Y0.

G2 X-5. Y.25 I.25 J0.

G1 X-2.5

G3 X-2. Y.75 I0. J.5

G1 G40 Y1.25

G0 Z2. M5

G91 G28 Z0 M9

M1

 

N4(CARBIDE DRILL FOR THIS JOB ONLY)

G91 G28 Z0

G0 G17 G40 G49 G80 G90

T4 M06 ( 1/4 DRILL)

G0 G90 G56 X-4.2277 Y-1.4433 S2000 M3

G43 H4 Z2. T3 M8

G98 G83 Z-.5 R.1 Q.1 F10.

X-.6867

M5

G91 G28 Z0 M9

M1

 

N3(ROLL TAP)

G91 G28 Z0

G0 G17 G40 G49 G80 G90

T3 M06 ( 3/8-16 TAPRH)

G0 G90 G57 X-4.2277 Y-1.4433

G43 H3 Z2. T5 M8

M29 S200

G98 G84 Z-.5 R.1 F12.5 P100.

X-.6867

M5

G91 G28 Z0 M9

M1

 

N5(BRAND NEW TOOL NEEDED)

G91 G28 Z0

G0 G17 G40 G49 G80 G90

T5 M06 ( 3/8 FLAT ENDMILL)

G0 G90 G58 X-2.7157 Y-1.6796 S8000 M3

G43 H5 Z2. T1 M8

Z.2 G1 Z.1 F5.

G2 X-2.0673 Y-1.3026 Z.0383 I.3242 J.1885 F20.

X-2.7157 Y-1.6796 Z-.0235 I-.3242 J-.1885

X-2.0673 Y-1.3026 Z-.0852 I.3242 J.1885

X-2.7157 Y-1.6796 Z-.147 I-.3242 J-.1885

X-2.0673 Y-1.3026 Z-.2087 I.3242 J.1885

X-2.7157 Y-1.6796 Z-.2705 I-.3242 J-.1885

X-2.0673 Y-1.3026 Z-.3322 I.3242 J.1885

X-2.7157 Y-1.6796 Z-.3939 I-.3242 J-.1885

X-2.0673 Y-1.3026 Z-.4557 I.3242 J.1885

X-2.4505 Y-1.8615 Z-.5 I-.3242 J-.1885

G1 X-2.4795 Y-2.0435

X-2.4585

G3 X-1.9905 Y-1.7673 I-.0105 J.5524

G1 X-2.9475

G2 X-3.0215 Y-1.4911 I.4785 J.2762

G1 X-1.9165

G3 X-1.9905 Y-1.2149 I-.5525 J0.

G1 X-2.9475

G2 X-2.4795 Y-.9387 I.4785 J-.2762

G1 X-2.4585

G0 Z.25 G0 G0 X-2.2815 Y-1.1161

Z.2 G1 Z-.5 F5.

G41 D5 X-2.6565 F20.

G3 X-3.0315 Y-1.4911 I0. J-.375

X-1.9065 I.5625 J0.

X-3.0315 I-.5625 J0.

X-2.6565 Y-1.8661 I.375 J0.

G1 G40 X-2.2815

G0 Z2. M5

G91 G28 Z0 M9

G28 Y0

M30

%

[Ron Branch @ 5th Axis]

Go back and read the thread again everything you need is in that thread.