Flowline

[KMartin]

Hi everyone - Could I please get some help with this surface .

I would like to create one surface and use the flowline toolpath .

Make it quick a simple . I have been trying but not having much luck creating one

surface . Any help would be appreciated .... Thanks

 

X6

Mill Level 3

44.MCX-6

[Guest]

Take a peek at this, should help you. You may want to modify the surface for height a bit but should show you the method

 

After I untrimmed the surfaces, I used Create >> Curve Slice, to build some geometry, then cleaned it up, then used Create >> Surface >> Swept

[KMartin]

Thanks for the help J...much appreciated .

 

Cheers