How do I separate the Manual Entry and the Operation Comment?

[PcRobotic]

Hi,

I'm having problem to seperate the Manual Entry comment and the Operation Comment because they are 1 block and if I disbale one of then I'm having a conflict. Please read below. Thank you and please help.

 

 

 

(I want Manual Entry Here)<=======================================

N1G0G17G40G54G80G98M5

(C-AXIS FACE CONTOUR OPERATION 1)<======================================= (I disabled the Manual Entry from this block but it does not show the Manual Entry if I copy and pasted into another post block)

( 3/16 FLAT ENDMILL)

T0101

G0C0.Y0

G97S200M13

S2500

X.4629Z.1M8

G12.1

G1X.4338C.0808F5.

Z-.33

G41X.394C.0609F0.

G3X.3775C.041R.0281

G1C-.041

G2X.14C-.1598R.1187

G1X-.14

G2X-.3775C-.041R.1187

G1C.041

G2X-.14C.1598R.1187

G1X.14

G2X.3775C.041R.1187

G1C.031

G3X.394C.0111R.0281

G1G40X.4338C-.0088

X.3937C.0808

G41X.354C.0609

G3X.3375C.041R.0281

G1C-.041

G2X.14C-.1398R.0988

G1X-.14

G2X-.3375C-.041R.0988

G1C.041

G2X-.14C.1398R.0988

G1X.14

G2X.3375C.041R.0988

G1C.031

G3X.354C.0111R.0281

G1G40X.3937C-.0088

Z.1F500.

G30U0V0W0H0.

T0100M9

M1

[Guest]

It really is time to Call your reseller.

 

It's been suggested to you previously,

 

You're having a bunch of issues and you should be working through your reseller at this point.

[NOTW Programmer]

Hi,

I'm having problem to seperate the Manual Entry comment and the Operation Comment because they are 1 block and if I disbale one of then I'm having a conflict. Please read below. Thank you and please help.

 

 

 

(I want Manual Entry Here)<=======================================

N1G0G17G40G54G80G98M5

(C-AXIS FACE CONTOUR OPERATION 1)<======================================= (I disabled the Manual Entry from this block but it does not show the Manual Entry if I copy and pasted into another post block)

( 3/16 FLAT ENDMILL)

T0101

G0C0.Y0

G97S200M13

S2500

X.4629Z.1M8

G12.1

G1X.4338C.0808F5.

Z-.33

G41X.394C.0609F0.

G3X.3775C.041R.0281

G1C-.041

G2X.14C-.1598R.1187

G1X-.14

G2X-.3775C-.041R.1187

G1C.041

........

I can help you out, which post is it, MPMaster or IHS. What exactly are you trying to accomplish ?