Working on a new lathe post

[Jrygus]

We just received in a Mori NLX2500SY. I am going to be working on a new post. I plan to start with the MPLMaster post. I was just wondering if anyone had experience with these machines, and would recommend a different starting point?

[Guest]

and would recommend a different starting point?

 

Yeah, buy one "for" that machine and call it done

[Mick]

Yeah, buy one "for" that machine and call it done

 

If you don't want to be bothering with the work of tweaking it to suit..... sure, go ahead and buy an "out of the box post"

 

However, if you are keen to tweak the post to suit, then the MPLMaster is a very good starting post for a C/Y axis machine, and probably wont require much modification.

[RObert TImby]

In House Solution has one great out of the box. That what I use for mine never tweaked much it expect for the header.

[MSL]

In House Solution has one great out of the box. That what I use for mine never tweaked much it expect for the header.

 

Hi Robert,

If your reseller is here in Southern California, How can you request a post from In House solution in Canada?

Thanks.

Ara.

[RObert TImby]

We bought the post from the reseller. Were they get it from it's up to them I think.