New install issues on MCX6

[Manuel0822]

Just a got a new computer and did a clean new install of X6 on it, however after the installation no matter what i do, I will not get any toolbars, I've already tried several times removing MC with no luck, Any ideas?

 

BTW working on windows 7, same I had on my old PC.

 

TIA

[Scott Lundin Shopware Inc.]

Shut down Mastercam, then go into mymcamx6\config folder and delete the file named mcamx.config. Re-start Mastercam and it will rebuild a new mcamx.config file.

[crazy^millman]

Are you installing this on a user account? If you have an admin account and an user account you will want to try installing using the user login and then typing in the password for the admin account when it pops up asking to do so.

 

HTH

[Manuel0822]

Thanks Scott.

 

It couldn't be any simpler than that. I wonder what happened this time? Have installed MC lots of times and this is the first time I've ever found this issue.

 

Thanks again.

 

Manuel

[Manuel0822]

Are you installing this on a user account? If you have an admin account and an user account you will want to try installing using the user login and then typing in the password for the admin account when it pops up asking to do so.

 

HTH

 

Nop, I'm the only user on this PC, I still don't understand what happened but at least I've got thru tis time

[Midwest]

Thanks Scott,

 

Our designer just installed and had the same issue as Manuel0822 on his new computer.

 

I remember reading this post just the other day......and told him (our designer) I think I know how to fix this problem.........

 

 

Thanks again

 

 

[Scott Lundin Shopware Inc.]

Your welcome. I don't know exactly what causes the no toolbar situation when installing X6 for the first time but I have seen it happen several times now. It seems that somehow the mcamx.config file doesn't install itself properly.