off center

[TERRYH]

What causes my part to be off center and really small sometimes when I click fit ? Like when I am rotating a part then go to a specific view say back to ISO and click fit it goes off center and is small and will not work right, I have to use my mouse to make it fit the screen. I have closed MCX ran ram saver everything and nothing helps once it happens.

[Reko]

I'd look for some stray geometry in the area away from your part.

[darko herak]

What causes my part to be off center and really small sometimes when I click fit ? Like when I am rotating a part then go to a specific view say back to ISO and click fit it goes off center and is small and will not work right, I have to use my mouse to make it fit the screen. I have closed MCX ran ram saver everything and nothing helps once it happens.

there can be some geometry away from your desired part, so if you can not find it try to save only geometry that is around center, as save some...

or click delete window in the area that look like empty

[TERRYH]

I figured it out there was a color I did not have on my part, deleted it and it was fine, although I could not see anything on the screen, thanks for the ideas.