Multiaxis code for DMU70 EVO

[S.MCINTOSH]

Is anyone out there running full multiaxis programs on a DMU70 EVO. I cannot get the code to run correctly. If possible, could anyone share even a sample of the nc code running full multiaxis? Also the multiaxis command codes to enable all five axis to move and track the working coordinate system. Thanks in advance for your help.

[Mic]

Which controller?

 

MillPLUS, TNC or Siemens?

[S.MCINTOSH]

Heidenhain Mill plus IT V520

[TK-32™]

Here's a lot of information. Let me know if you have more questions. I'll help you as much as I can.

 

 

http://www.emastercam.com/board/index.php?showtopic=68327&hl=

[S.MCINTOSH]

TK-32, Thank you! I do have more questions. I am new to the full simultanious 5 axis machining. I am not sure but our particular machine is table, table 5 axis and it seems that the info you gave as well as most of the info in my book is aimed at a B axis spindle. Am I wrong? I have been trying a ton of different combinations of the codes with no success. Is there a place I can find that can put most of this info into laymens terms for a newbe like myself?

[TK-32™]

Yes, that's for a DMU100T