Need some help with custom tool

[JNorville]

Got a custom tool thats not showing up in X6 verify. I have it built on its on level, save in the library as mcx file, etc. Any ideas?

[Jayson Kramer]

Does it show in backplot?

[Rotary Ninja]

Save the level as a seperate MCX file and put it on here.

 

What Jay is getting at (I think ) is if it is showing in Backplot but not in Verify go into Verify and click the options button... yellow folder with the red "!" on it. Make sure in the middle of the window under Tool Profile "As Defined" is checked.

[JNorville]

Got it. had to change to auto and tolerance to .001. Thanks

[left coast lefty]

I just ran into this the other day. My threadmill was showing in backplot but not Verify. I deleted the tool in Tool Manager, then grabbed it from my library and it worked.

 

X6 MU3

[Rotary Ninja]

I still get a bad tool profile every once in awhile. I usually trace over it with new geometry on a new level and problem solved.