wcs keeps vanishing

[abc1234]

Hello , i'm running x6 mu3 . my home view in WCS keeps dissapearing and i have to keep resetting it. Is there a way to fix this problem. I also have a problem with the

T plane / Cplane updating when i change views. I have the proper settings in configuration settings.

 

Thanks

[Chris Bloedorn]

Under settings/configuration/CAD settings.....make sure you turn this off....

 

[Jayson Kramer]

And I always turn off the one below it to.

[cadman2112]

I actually only turn off the middle one.

 

I am thinking, he needs to keep hitting F9 to bring up his origin lines

 

If that's the case, in the config on....

 

Screen >> check Display part Information, that will turn on the origin lines with every part you create

[Jayson Kramer]

NO NO not the F9 lines what a wast when you have the Alt F9 Gnomon and it wont get in the way , along with showing you the postive planes your part lays in.

[cadman2112]

You know what, RIF

 

I should have read that completely,

 

You are quite correct Jay