6 place Tool Number For Cut Comp

[kennebec]

Oku OSP Lathe using Cutter Comp "In Control" I need 6 Place Tool Numbers not just the 4 I am getting, can you point me to the location in the post where I should be looking to make this change?

 

 

N11 G50 S1800 M8

G0 T0000 M42 Would Like to See T000000 only on tools using Comp

G96 S300 M3

( LT 16NR)(QUALIFY Z TO CTR LINE)(TOOLNOSE RAD COMP)(RGH BORE -.006 )

G41 G0 X1.7 Z.15

X1.68

Z-.075

G1 X1.78 F.002

Z-.1222

X1.7484 Z-.1314

G2 X1.7324 Z-.1452 I.016 K-.0139

G1 Z-.2443

 

Thank You Forum

[crazy^millman]

Kennebec, did you ever get an answer to this question?

[kennebec]

Thanks 5axisGuy for asking,

I did not get this figured out yet...

[Craig-B]

I'm thinking in the format statment you may have to create a new one I'm asuming yours is set to 7 Integer, force four leading.

 

# Format statements

fs2 7 4 0 4 0l #Integer, force four leading (Current)

 

# Toolchange

fmt T 7 toolno (Current)

 

---------------------------------------------------------------------

 

# Format statements

fs2 21 6 0 6 0l #Integer, force six leading (Add new line)

 

# Toolchange

fmt T 21 toolno (Edit this line)

 

Hope this helps