bullnose cutter 2d swept

[petro7]

I'm trying to cut a 20 inch rad 0n a part 88 inches long using 2d swept...it works fine when I run the toolpath back and forth on the x axis, but if I want to use the z ,y axis and step over in the x it will not work. I am running x4 level 1 mill. it work if i use a ballnose cutter but not a bullnose. maybe I need an upgrade?

[crazy^millman]

Yeah that was addressed along with many other issues. X7 should be here soon and I would not want ot miss what they have added to it.

[petro7]

Ok thanks. I will do it the long way.