Variaxis I-700 Control Option

[Zoffen]

Got a 5 axis video i'll upload tonight!

[Zoffen]

Here you go:

 

First 5x cut on the new machine. DAMN this machine is SUHWEEET!

 

[Sticky]

Sick system! I love double and triple level fms'. Those new mazaks sure are nice looking machines.

[Joe788]

Zack, you gotta give us a video of the Palletech robot passing the pallet into the pallet changer, and then all the craziness that goes on to get the pallet into the machine.

 

Were you using G43.4 on that test cut?

[Zoffen]

Zack, you gotta give us a video of the Palletech robot passing the pallet into the pallet changer, and then all the craziness that goes on to get the pallet into the machine.

 

Were you using G43.4 on that test cut?

 

I'll get some more vids when i get some time. Its gets pretty intense with all that shiz going on at one.

 

yes. it was using G43.4 on that cut. I only use TCP for 5 axis stuff.

[Zoffen]

OKay so only a few months late....and don't mind the shakey phone camera vid!

 

AND ON WITH THE MACHINE PORN:

 

Walk around video where i try and palletchange at the end but have the rapid on 0 so no go lol:

 

View of Pallet Change from behind cell:

 

View of Pallet Change from Operator Station:

 

View of how the switcher area works and of inside the machine:

[Zoffen]

View of the RGV moving a pallet into the load area:

 

Hope your all happy now!

[GoetzInd]

Nice!

 

Mike

[cincy k]

Sweet. But how in the hell do you ever see what you're machining?!

[Zoffen]

Sweet. But how in the hell do you ever see what you're machining?!

 

You can drag the control into the pallet change area so it would work like a standalone.

Then when your parts are proved out you lock out the pallet area and move the switcher to ready position.

 

I agree it is kinda unnerving not being able to look in a window and watch it run.

 

But thats where a few IP cameras come into play