x+ for x7 setup question

[FTI2007]

I got X+ installed for X7. I am having trouble when I print a tool list with my logo. There is a white box or an extention of the header box that extends over part of my part image. I would post an image but im not sure how to do a screen shot. I hope this makes sense... Thanks in advance.

[Machineguy]

Try this. Pick print preview. when that comes up, reduse size to say 70%. If that looks right, try the print buttom. Your logo may need to be scaled a little smaller to fit correctly

 

Machineguy

[Guest]

I shift my cap to right AND use a Landscape sheet

 

I did modify by setting a bit to allow the info a bit more room as well

[FTI2007]

I dont think its the logo causing problems. The white box extends to the right from the info box that is before the tool list.

[FTI2007]

I copied all the settings I had used in x6 (which worked perfect). In x7 not so much. If I turn it to landscape I can get it to work But Im prefer it in portrait.