multiple posts

[Roger Martin from CNC Software]

In the "Text_&_post_files_&_misc/" folder on the Fourm FTP site is -> MULTI_POST.ZIP

 

This "post processor" method is similar to what Mick's VBS does, but done using a PST, in that you just define the string variables for the PSTs to be run.

[Ron Branch @ 5th Axis]

Thnaks Jimmy and Roger that gives me some ideas.

 

I am wondering can you combine a set and pst into one thing and get a posted program as well as a set-up sheet from one action or is this too much to try to do at one time.

 

Crazy Millman

[Roger Martin from CNC Software]

If you are talking about using the .SET type Setup Sheet templates - sure can...

 

From my eariler post ->

 

quote:

---

I did that automatically created a Setup Sheet (using the .SET type setup sheet templates) immediately after the PST has created the NC file. You just posted your operations as usual and you got the .NC and a .DOC with no additional steps.

---

[crazy^millman]

Duh it does help to pay close attention.

 

I like that mulit post that worked very sweet I now pull that up and can post the set sheet and the posted program very cool. I appericate that one Roger.

 

Crazy Millman

[Rekd™]

Agreed, Ron.

 

I will be able to run that, post the proggie, post the setup sheet, then use Launch() to trigger the database and fill in the blanks.

 

to Roger!

 

'Rekd